en
ACCTIVA Professional Flash
 |
Zoom
 |
Zoom
 |
Zoom
close
The professional sprinter
The battery charger with rapid-charge function, safe for electronics. Provides the vehicle with current even during diagnosis and re-programming of the vehicle’s software. The integrated USB port ensures that the charger is completely future-proof: software updates can be loaded very easily. Powerful: 70 A in permanent operation.
The battery charger with rapid-charge function, safe for electronics. Provides the vehicle with current even during diagnosis and re-programming of the vehicle’s software. The integrated USB port ensures that the charger is completely future-proof: software updates can be loaded very easily. Powerful: 70 A in permanent operation.
Recommended fields of use
Ideal for motor vehicle workshops and showrooms
Overview
Product information
- Battery charger with the option to preselect capacity for all types of starter battery
- For charging or charge conservation of conventional lead acid, lead calcium/silver batteries, or those of the sealant type (AGM, MF), as well as maintenance-free lead GEL batteries, without disconnecting from the vehicle power supply.
- All functions (battery capacity, nominal voltage, service function, FSV/buffering function) can be clearly viewed and set on the display
- All present charging data (charging current, charging voltage, Ah charged so far) are shown on the display
- Based on Active Inverter Technology
- Integral USB port
Technical Data
| Nominal charging voltage | 12 V |
| Charging current | 2 – 70 A |
| Battery capacity | 10 – 250 Ah |
| Mains voltage | 100 V or 230 V +/- 15 % |
| Charging characteristic | IUo U |
| Marks of conformity | CE / TÜV North America / TÜV PSE |
| Battery charger lead | 5 m with fully insulated terminals |
| Dimensions | 315 x 110 x 200 mm (L x W x H) |
| Weight | 5 kg |
Equipment features
Applications:
- Diagnosis and charging mode: Supplies parallel loads during diagnosis. The charger offers maximum safety during this process, with a current of 70 A.
- External power supply without battery, e.g. during battery change, in showrooms or at trade fairs
- Refresh mode: Low-power batteries can be recharged in this mode (desulphating). This process takes place via a microprocessor-controlled IUIoU characteristic.
- Rapid charging thanks to Active Inverter Technology
Protective features:
- Electronic reverse polarity protection
- Thermal overload protection
- Safety cut-out
- Electronically safe
Technology
Active Inverter Technology - battery-charging at its most intelligent
The innovative concept underlying Active Inverter Technology is based on the combination of a digital control circuit, dU/dt cut-off and an active-rectifi cation inverter. The digital control circuit keeps the charging current and charging voltage constant throughout the charging operation, compensating for any fl uctuations in the mains voltage so that the battery is charged gently and carefully.
The technology behind the dU/dt cut-off stands out for its pro-active responsiveness. The special thing about this is the way in which it takes account of each battery’s age and state of charge and actively fine-tunes the programmed charging characteristic to match. The charging operation is fi nished at the ideal point in time - that is, when the voltage has reached its maximum. This prevents overcharging, reducing water consumption and prolonging battery life by as much as 50 %.
Find further information in Focus on charging.
This article has been evaluated 11 times. The average is (1=very helpful ... 4=not helpful): 2.5