TransCut

Zoom

TransCut is a plasma cutting device which does not, as is usual, use compressed air, but rather, a small amount of liquid. This liquid serves as a medium for the high-energy plasma beam, and makes the device lightweight and portable. A 230 V connection or a generator suffice as a power supply. The compact cutting device can be taken anywhere at any time, and is ready for use within a very short time.

Cutting with TransCut means “green cutting”. Toxic emissions are greatly reduced, by up to 90 %! This considerably improves the working environment. At the same time, Trans Cut reduces metal sparks and contamination of components. The cutting system cuts steel, chrome/nickel and aluminium. High quality cuts of up to 6 mm are possible.

Base metals

Structural steels, Cr/Ni steels, aluminium

Fields of use

Air conditioning and ventilation systems, vehicle panel-beating/bodywork, construction of industrial plant and pipework, maintenance/repair

Technical Data

Equipment features

Technical Data

Single phase mains voltage	230 V
Mains voltage tolerance	+ 10 % / - 15 %
Mains fuse protection (slow-blow)	16 A
Cos phi	0.99
Cutting current range	16 – 30 A
Duty cycle at 10 min/40° C (104° F)	30% d.c. at 30 A
Duty cycle at 10 min/40° C (104° F)	100% d.c. at 16 A
Length of operation per tank	3 h
Protection	IP 23
Dimensions l/w/h mm	460/180/275
Dimensions l/w/h inches	18.11/7.09/10.83
Weight (with plasma cutting torch) in kg	14,6
Weight (with plasma cutting torch) in lb	32.19
Marks of conformity	CE
Safety	S

Equipment features

Standard equipment

Generator-compatible
Energy-saving inverter technology
Contact ignition
Regenerative torch cooling system
Closed-circuit fluid system
Test button for fluid system
Filling level sensor for working medium
Temperature-controlled fan
Overtemperature protection
Carrying strap

Options

Guide set

This article has been evaluated 34 times. The average is (1=very helpful ... 4=not helpful): 2.4

Glossary

Top