Fronius IG 40 / 60 HV

Zoom

The Powerhouse

Higher yield due to work-sharing is achieved by linking the two power circuits using the MIX™ concept, our optimised master-slave system. In the part-load range only one of the two power stage sets operates, while both work together at full-load. The advantages are a noticeable increase in yield with a simultaneous reduction in operating hours.

As the input voltage range of the Fronius IG 60 has been expanded from the former 500 V to 530 V, longer module strings can be connected. Due to this improvement, the product name changed from “Fronius IG 60” to “Fronius IG 60 HV”. “HV” stands for “High Voltage”.

Technical Data

Equipment features

Technical Data

Fronius IG	40	60 HV
Input Data
MPP voltage range	150 - 400 V	150 - 400 V
Max. input voltage (at 1000 W/m²; - 10° C)	500 V	530 V
PV system output	3500 - 5500 Wp	4600 - 6700 Wp
Max. input current	29,4 A	35,8 A
Output Data
Nominal output	3500 W	4600 W *)
Max. power output	4100 W	5000 W
Max. efficiency	94,3 %	94,3 %
Euro efficiency	93,5 %	93,5 %
Mains voltage /frequemcy	230 V / 50 Hz (60 Hz)
Distortion factor	< 3,5 %
Power factor	1
Power consumption at night	0 W
General Data
Size l x w x h	610 x 344 x 220 mm (733 x 435 x 225 mm)
Weight	16 kg (20 kg)
Cooling	controlled forced-air cooling
Protection class (housing)	IP 21 (IP 45)
Ambient temperature range	- 20 ... 50° C
Permissible humidity	0 ... 95 %
Protective Devices
DC insultion measurement	warning when Riso < 500 k Ohm
Polarity reversal protection	built-in
Behaviour on DC overload	displacement of operating point

*) Important note:
Fronius IG 60 HV with Setup ES and Setup IT are supplied with a nominal output of 5.000 W!

Equipment features

Fronius LC-Display
HF-Transformer
Module-Manager
MIX-Concept

This article has been evaluated 55 times. The average is (1=very helpful ... 4=not helpful): 2.4

Glossary

Top