Software

Fronius Configuration Tool

More comprehensive,  user friendly!
For the perfect sizing of your pv system. In the planning stage of a PV system, the Fronius Configuration Tool supports you in the best possible way to get the perfect sizing. Just complete the input fields and you will quickly get charts of the different configuration possibilities.

Disclaimer:  The Fronius Configuration Tool was developed by Fronius to assist Users with system designs but does not guarantee the configuration is appropriate for your use. By using the Fronius Configuration Tool, the User claims all responsibility for the accuracy and validity of the results including, but not limited to, system design, performance, and code compliance. It is incumbent upon the User to verify that the system design will meet their site-specific needs and local codes.

System Requirement for using Fronius Configuration
Microsoft Internet Explorer 6.0 or equivalent.

NEW! Fronius Solar.access

The free Fronius Solar.access software provides advanced, onsite data analysis and archiving options for the PC.
As an administrator tool, it offers full setting options for all system components in Solar Net – no matter which Fronius Datalogger you choose:  Fronius Datalogger easy / pro or the new Fronius Datalogger Web.

System Requirement for using Fronius Solar.access: 

• Windows XP, Vista or 7
• 32-bit operating system (64-bit not currently supported)

Fronius IG.access

Please note that Fronius IG.access has been replaced by the new Software Fronius Solar.access! Data from Fronius IG.access can be imported to the new Software.
Fronius IG.access from version 5.0 accesses on inverter functions, which are already implemented in inverters from serial number 14310776 upwards. Inverters from serial number 14190623 upwards only require a software update which is available for free on this page.

Fronius Datalogger Web Update

Change Log gives you information on:

• Update-ability directly via Internet
  (manual update downloads are no longer required)
• Display of status LEDs also in the web interface
• CO2-factor can now be set

Update to firmware for Datalogger Web

Datalogger.update

Keep up to date!

Find the latest firmware update for the Datalogger Easy and Pro.

Fronius Solar.interface

The software program "Fronius Solar.interface" is the counterpart of the Fronius Interface Card / Box.  This program has been created to support potential developers, who intend to design their own counterpart for subsequent processing of the PV system data.  The execution of Fronius Solar.interface requires "Microsoft .NET 2.0-Framework".  If this package has not been already installed on your PC, please click here.

With this program, the communication between PC and Interface Card / Box can be tested. It supplies a listing of all components of the PV system (Inverter/s, Sensor Card,…) and enables their data query.

Fronius Solar.interface Example for software development

Provides the source code of the demo program mentioned above, which has been written in “MS Visual Studio 2005”.  After developing your own application on the basis of this software, you can process the data provided by the Interface Card/Box.

Update IF-Card easy V1.03.00

Fronius IG Display Simulation

The Fronius IG display simulation will give you a view of the indicator possibilities of the Fronius IG. Your inverter keeps you informed!