TransSteel Compact

Devices in the TransSteel Multiprocess series can perform all three MIG/MAG, TIG and SMAW welding processes to a high standard. Whether on a construction site or in the workshop, the welder always has flexibility and is equipped for a range of applications.
Please choose your desired product.

The TransSteel 2200 is a compact, 3-in-1 solution. It is the first single-phase inverter power source from Fronius that is also multiprocess-capable, bringing together MMA, MIG/MAG and TIG in a single device. The TransSteel 2200 is characterised by the intelligent design of the device, ease of use, robustness and a high level of reliability. Weighing only 15.5 kg, it is also one of the lightest devices on the market.

Product details

Welding current max.230 A
Welding current min.10 A
Welding current / Duty cycle [10min/40°C]210A / 30% MAG; 180A / 35% MMA; 230A / 35% TIG
Welding current / Duty cycle [10min/40°C]170A / 60% MAG; 150A / 60% MMA; 200A / 60% TIG
Welding current / Duty cycle [10min/40°C]150A / 100% MAG; 130A / 100% MMA; 170A / 100% TIG
Operating voltage14,5-24,5V MIG/MAG; 20,4-27,2 MMA; 10,4-19,2V TIG
Open-circuit voltage90 V
Mains frequency50-60Hz
Mains voltage230V
Mains fuse16A
Dimension / b215 mm
Dimension / l560 mm
Weight15 kg
Degree of protectionIP23

Faster process switching

A second gas solenoid valve on the rear enables rapid process switching without having to reconnect the welding gas.

Easy spool change

A side cover that opens downwards gives easy access to the wirespool. The spool can be changed without tools. 

Integrated polarity reverser

By reconnecting the integrated polarity reverser, flux core wires of different polarities can also be welded.

Carry handle and optional carrying strap

Single-phase mains connection

Integrated wearing parts box

A wearing parts box integrated in the housing is a handy storage feature.

No grid-voltage dependence

The power sources are available in country-specific variants, meaning they can also be used in regions with differing mains voltages. For more information, please contact your local Fronius contact.

Intuitive operation

Get welding straightaway in three easy steps by setting wire, wire diameter and gas. A wide range of characteristics are already pre-set on the device.

Saving Easyjobs

Two Easyjob storage locations allow you to save frequently used parameters.


With TAC, one spot is all it takes for tacking, because the pulsed arc sets the two weld pools in motion, making them jump together in next to no time, to make one single weld-pool. The TAC function is also very useful when welding light-gauge sheets without filler metal.

Spot and interval welding

Spot and interval welding are ideal for applications where thin sheets need to be welded, as the heat input is not so high. The arc intervals can be adjusted to suit the individual requirements and are applied to the workpiece with complete consistency.

Touchdown ignition

Touchdown ignition can be used in particular for sensitive application areas. This allows electromagnetic interference, which can occur during HF ignition, to be avoided.