TransSteel Compact

Devices in the TransSteel Multiprocess series can perform all three MIG/MAG, TIG and SMAW welding processes to a high standard. Whether on a construction site or in the workshop, the welder always has flexibility and is equipped for a range of applications.
Please choose your desired product.

Like all Multiprocess welding systems from Fronius, the TransSteel 2700 is ready for use in just three steps: select the wire, wire diameter and gas and start welding. You can switch between the individual welding processes in 60 seconds. In addition, the TransSteel can be used as a single-phase device up to 220A (TIG).

Product details

Welding current max.270,0 A
Welding current min.10,0 A
Welding current / Duty cycle [10min/40°C]270A 30% MIG/MAG; MMA; TIG
Welding current / Duty cycle [10min/40°C]210A 60% MIG/MAG; MMA; TIG
Welding current / Duty cycle [10min/40°C]170A 100% MIG/MAG; MMA; TIG
Operating voltage14,5-27,5V MIG/MAG; 20,4-30,8V MMA; 10,4-20,8V TIG
Open-circuit voltage85,0 V
Mains frequency50-60Hz
Mains voltage3 x 380V / 400V / 460V
Mains fuse16A
Dimension / b276,0 mm
Dimension / l687,0 mm
Weight29,7 kg
Degree of protectionIP23

No grid-voltage dependence

The power sources are available in country-specific variants, meaning they can also be used in regions with differing mains voltages. For more information, please contact your local Fronius contact.

We think you are located in a different country

The country currently selected is Fronius International. Would you like to stay on this page or do you want to switch to the local website?