The TransTig 1750 Puls is a completely digitised TIG-DC power source with an output of 170 A. It is both light and robust, self-explanatory in operation and delivers maximum power from a 230 V grid. The pulse mode allows lower heat input during TIG welding, better gap-bridging ability and superb weld seam appearance.
TransTig Puls
Product details
| Welding current / Duty cycle [10min/40°C] | 170A / 35% |
|---|---|
| Welding current / Duty cycle [10min/40°C] | 135A / 60% |
| Welding current / Duty cycle [10min/40°C] | 120A / 100% |
| Operating voltage | 10,1-16,8V |
| Open-circuit voltage | 93,0 V |
| Mains frequency | 50-60Hz |
| Mains voltage | 230V |
| Mains fuse | 16A |
| Dimension / b | 180,0 mm |
| Dimension / l | 430,0 mm |
| Weight | 9,1 kg |
| Degree of protection | IP23 |
TAC
With TAC, one spot is all it takes for tacking, because the pulsed arc sets the two weld pools in motion, making them jump together in next to no time, to make one single weld-pool. The TAC function is also very useful when welding light-gauge sheets without filler metal.
HF ignition
The touchless and gentle high-frequency ignition is the easiest option for igniting the arc.
Touchdown ignition
Touchdown ignition can be used in particular for sensitive application areas. This allows electromagnetic interference, which can occur during HF ignition, to be avoided.