Perfect Welding

The current page does not exist in the target language.

Do you want to change the language and go to the home page or do you want to stay on the current page?

Change Language
Perfect Welding

TransPocket

The TransPocket is available in power categories 150 to 480 A. In addition to the almost indestructible housing and cutting-edge technology, the TransPocket also has numerous functions that simplify work for the user: HotStart, SoftStart and anti-stick provide support at the start of and during the welding process.
Please choose your desired product.

The TransPocket 2500 is a completely digitally-controlled MMA power source with resonant intelligence. The ideal characteristic ensures a constantly stable arc, even with mains leads up to 100 metres long. Stability is also guaranteed with fluctuating mains voltages (340 to 506 V) and during generator-powered operation. The TransPocket 2500 welds all electrode types up to 5 mm, including the vertical-down welding of cellulose electrodes. It is extremely robust yet also small, light and portable.

Product details

GENERAL DATA

Mains voltage3 x 380-460V
Mains frequency50-60Hz
Welding current min.15 A
Welding current max.250 A
Operating voltage min.20,6 V
Open-circuit voltage88 V
Degree of protectionIP23
Length
430 mm
Width
180 mm
Height
320 mm
Weight12,5 kg
Weight12,5 kg
Interference emission classA

TECHNICAL DATA

Power Factor (pf)0,99
Welding current / Duty cycle [10min/40°C]250A / 35%
Welding current / Duty cycle [10min/40°C]200A / 60%
Welding current / Duty cycle [10min/40°C]175A / 100%

SoftStart

The SoftStart function ensures a stable arc at the start of welding and was specially developed for electrodes that are welded with a low welding current (basic electrodes).
 

Anti-stick

If a short circuit occurs that causes the electrode to stick during MMA welding, the power source is switched off immediately. This prevents the electrode from burning out.

HotStart

To make the electrode easier to ignite, the current at the power source is increased for a fraction of a second during ignition. The HotStart function was specially developed for welding with rutile and Cel electrodes.

No grid-voltage dependence

The power sources are available in country-specific variants, meaning they can also be used in regions with differing mains voltages. For more information, please contact your local Fronius contact.

Contact

Would you like to find out more about the product?

Downloads

Show all downloads for product