Modbus SunSpec is an open, Modbus-based communication protocol that conforms to the SunSpec Alliance standard. The following Fronius products feature interfaces for use with Modbus SunSpec, which enables the easy integration of Fronius inverters into third-party systems via Modbus.
Note: the scale factor for calculating the power specification via Modbus has been adjusted in Fronius Datamanager updates to software versions higher than 3.7.1-5. This scale factor is not specified by Fronius – it is stipulated in the SunSpec Alliance specifications. Until now this value has always been 0, but in the new software it is set to -2. This is to facilitate more precise setting of the power specification, in particular for larger systems. This scale factor is to be viewed as an exponent (i.e. the number and direction of comma shifts). A power specification of 100% with a factor of -2 would be written as follows: 10000x10^-2 = 100%. The Modbus value for 100% would therefore be 10,000. To retain compatibility with older Fronius software versions, it is recommended that the scale factor be read correctly via Modbus.
Fronius Datamanager Modbus TCP & RTU
Operating Instruction Fronius Datamanager 2.0
Modbus Register - SunSpec Maps, State Codes and Events
Fronius GEN24, Tauro Modbus TCP & RTU Manual
Fronius GEN24 & Tauro Modbus Register – SunSpec Maps, State Codes & Events
In return for making our protected premium content available, you allow us to use your personal data (name, address, e-mail address, company) to send you newsletters by e-mail, so that we can inform you about the Fronius International GmbH product portfolio from our Fronius Solar Energy business unit (promotions, new offers, new programmes and training opportunities in the field of photovoltaics).
Learn more here