AccuPocket TIG

Limitless mobility brought to TIG welding

In addition to mobile electrode welding, mobile TIG welding is now a reality thanks to the AccuPocket 150/400 TIG. One battery charge is enough for up to 17 minutes of continuous operation at full power (150 A) and the device is fully operational again after approx. 30 minutes of rapid charging. AccuBoost Technology ensures that the power needed for perfect ignition and weld properties is permanently at hand.
 
Featuring its most robust design yet and weighing just 11 kg / 31 lbs, AccuPocket is the perfect companion for assembly work on construction sites. AccuPocket can also be used in electrically hazardous areas, such as in boiler welding, as a mains lead is not required.

AccuBoost Technology

AccuBoost brings tangible improvements to ignition properties, arc stability and arc dynamics. The integrated high-performance battery can provide very high short-circuit currents for brief periods during welding and reliably minimises electrode sticking. This perfect interplay between the battery and the welding electronics also makes it possible to have a high welding voltage at maximum power, which prevents annoying arc breaks.

Lithium-ion technology

The AccuPocket's battery is a high-performance iron-phosphate-based lithium-ion (LiFePO4) battery with a capacity of approx. 400 Wh. This corresponds to 160 cm of a TIG weld seam produced in 17 minutes' welding time (130 A, a-dimension 2 mm), or eighteen 2.5 mm electrodes. Complying with stringent safety standards, these battery cells put in a particularly convincing performance in high-power applications and stand out for the following attributes: high intrinsic reliability, no memory effect, long service life and low self discharge.

LET'S GET CONNECTED

Fronius USA, LLC

fnyrf.hfn@sebavhf.pbz Where to buy

Product registration

Register your AccuPocket free of charge now and get a three-year warranty!

To registration

The right solution for your requirements