Ignis
Please choose your desired product.
A true all-rounder: XT stands for Extended, because the Ignis 250 Extended version is designed for mains voltages from 200 to 600 V and can therefore be used worldwide. Depending on the power category and mains fuse, up to 250 A is possible in single-phase operation. Special features of the XT variant – Three-phase 200-600 V 10 %/+10 % – Single-phase use up to 250 A (depending on mains fuse protection) – Full generator compatibility – Higher energy efficiency
Technical Data
General Data
| Welding current min. | 10 A |
|---|---|
| Welding current max. | 250 A |
| Operating voltage min. | 20,4 V |
| Operating voltage maximum | 30 V |
| Open-circuit voltage | 101 V |
| Dimension / length | 488 mm |
| Dimension / width | 210 mm |
| Dimension / height | 369 mm |
| Weight | 17,3 kg |
| Degree of protection | IP23 |
Technical Data
| Mains voltage | 200 V |
|---|---|
| Power Factor (pf) | 0.99 |
Contact
Would you like to find out more about the product?
Find out more about the features of the Ignis welding machine.
Current firmware and software updates for the Ignis.
Function overview
| Function | Ignis 150 | Ignis 180 | Ignis 250 |
| HotStart | x | x | x |
| SoftStart | x | x | x |
| Anti-stick | x | x | x |
| MMA Pulse | x | x | x |
| TIG variant | x | x | - |
| Cel function | x | x | x |
| TAC tacking function | x | x | x |
| TIG Comfort Stop | x | x | x |
| TIG Pulse | x | x | x |
| TIG Multi Connector | x* | x* | x |
| Remote control operation | x* | x* | x |
| Time Shutdown (300 s/900 s/off) |
x | x | x |
| TrackingArc | x | x | x |
| XT variant | - | x | x |
| Extended XT functionality | - | - | x |
| 5 EasyJobs | - | - | x |
| Favorites button | - | - | x |
*Ignis 150/180 only with TIG variant
