TransPocket

The TransPocket is available in power categories 150 to 480 A. In addition to the almost indestructible housing and cutting-edge technology, the TransPocket also has numerous functions that simplify work for the user: HotStart, SoftStart and anti-stick provide support at the start of and during the welding process.

Please choose your desired product.

The new generation of TransPocket 150/180 devices brings a high degree of flexibility. The integrated PFC (Power Factor Correction) technology supports the use of extremely long mains leads of up to 100 m in length. The operating concept has also become even more intuitive. A 7-segment display makes it possible to quickly read off the parameters that have been configured. In addition, the display is slightly set back and therefore well protected against damage. Easily comprehensible setup settings are a tremendous help in simplifying operation.

Product details

Technical Data

GENERAL DATA

Mains voltage	230V
Mains frequency	50-60Hz
Welding current min.	10 A
Welding current max.	150 A
Open-circuit voltage	96 V
Degree of protection	IP23
Length	365 mm
Width	130 mm
Height	285 mm
Weight	6,5 kg

Welding current / Duty cycle [10min/40°C]	150A / 35%
Welding current / Duty cycle [10min/40°C]	110A / 60%
Welding current / Duty cycle [10min/40°C]	90A / 100%

Functions

SoftStart

The SoftStart function ensures a stable arc at the start of welding and was specially developed for electrodes that are welded with a low welding current (basic electrodes).

Anti-stick

If a short circuit occurs that causes the electrode to stick during MMA welding, the power source is switched off immediately. This prevents the electrode from burning out.

HotStart

To make the electrode easier to ignite, the current at the power source is increased for a fraction of a second during ignition. The HotStart function was specially developed for welding with rutile and Cel electrodes.