Perfect Welding

The current page does not exist in the target language.

Do you want to change the language and go to the home page or do you want to stay on the current page?

Change Language
Perfect Welding

Fronius product quality Exceeds all standards

Top quality

When it comes to reliability, sturdiness, and standards, you are not willing to compromise. You want welding systems that will remain faithfully by your side as you tackle the harsh day-to-day realities of welding work.

Look no further! Since time immemorial, we have been developing welding systems that do not just comply with all standards and requirements but actually exceed them. Our secret? In-house endurance tests that put our products and solutions through their paces time and time again while making them work longer and harder than in everyday life. No need to thank us, it’s just what we do.


Very long service life Perfectly designed for industrial applications with a service life of ~ 30,000 h (40% duty cycle and 25°C ambient temperature).
1
Tested for sturdiness and reliability iWave power sources have to undergo eight endurance tests. As a result, the sturdiness and reliability of our systems is assured.
2
IP 23 protection Suitable for outdoor use
3
Works with all mains voltages One system for the entire voltage range from 200-600 V (only applies to iWave 300i-500i)
4
Generator-compatible Our systems can also run off a generator.
5
Shock- and impact-proof plastic housing
6
Display protection Protective cover on control panel plus a lowered and inclined design to protect against mechanical damage
7
1
Very long service life
Perfectly designed for industrial applications with a service life of ~ 30,000 h (40% duty cycle and 25°C ambient temperature).
2
Tested for sturdiness and reliability
iWave power sources have to undergo eight endurance tests. As a result, the sturdiness and reliability of our systems is assured.
3
IP 23 protection
Suitable for outdoor use
4
Works with all mains voltages
One system for the entire voltage range from 200-600 V (only applies to iWave 300i-500i)
5
Generator-compatible
Our systems can also run off a generator.
6
Shock- and impact-proof plastic housing
7
Display protection
Protective cover on control panel plus a lowered and inclined design to protect against mechanical damage

Product quality tested 8 times over

Although trust is good, testing is better: all our welding systems undergo a precisely defined set of endurance tests. In fact, our products have to prove themselves eight times over before they are even allowed to leave our factories. We have made it our aim to test our products well beyond the limit values required under the relevant standards (IEC 60974-1/-3) – and ensure they pass!

Summary table of endurance tests

METHOD

DESCRIPTION

TEST OBJECTIVE

FRONIUS QUALITY

Impact test Hammer blows with an impact force of 10 Nm at defined positions Housing must be impact-proof, particularly when used on construction sites 3 points per side instead of 1 (as required by standard)
Metal dust test A fan blows fine metal dust onto a system Housing must remain impervious in dirty environments Additional test (not required under standard)
Low temperature performance Extreme fluctuations in temperature and humidity System must be able to withstand harsh environments Tested down to -40°C instead of -10°C (as required by standard)
Drop withstand System dropped onto a hard surface from a defined height Housing stability, breaking strength, and electrical safety Tested from a height of 250 mm instead of 100 mm (as required by standard)
Salt spray test System exposed to a highly saline spray mist for several days System must be resistant to corrosion, particularly near the ocean Additional test (not required under standard)
Moisture test System sprayed with water Protection of housing to ensure functional reliability and user safety 43% more moisture than required for a period of 76 h (93% instead of 50%)
Vibration test Extreme vibrations System load capacity Additional test (not required under standard)
AC duty cycle test     At higher frequencies up to 250 Hz and with a defined hosepack: Impedance (40–50 uH) instead of the required factory setting of 60 Hz

Service quality

A partner you can rely on the world over

We have always successfully lived up to our aim of offering first-class customer service for welders. We have an active worldwide presence – thanks to our global sales and service network, which includes 34 international Fronius companies plus our Fronius Service Partners, sales partners, and representatives in more than 60 countries. 

24-hour online customer portal

Service whenever and wherever you want it: myFronius offers round-the-clock access to all relevant documents and information for your Fronius products, and all in one central place. On the online customer portal, you will find everything you could possibly need to help with everyday welding tasks – from 3D data and instruction manuals right through to the spare parts catalog.