Interactive Operating Instruction
Clear, digital and mobile optimized for every device
Clear, digital and mobile optimized for every device
The Trial License allows you to test all welding packages and options for some arc hours.
This system is used for applications where the wire needs to be fed over a large distance. It is also suitable for use with soft filler metals. The PushPull system is equipped with two perfectly synchronised wirefeeders that ensure extremely precise wirefeeding. This is a prerequisite for high process stability, especially when long wire-feed distances and soft filler metals are involved.
/ Process: CMT
The focus here lies on the practically spatter-free welding process at a high welding speed and with high-quality results.
WF 60i ROBACTA DRIVE CMT
This highly dynamic wirefeeder supports all welding processes – from standard to CMT. It can be used for both hollow-arm robots and conventional robots.
WeldCube – all-inclusive data management
The WeldCube full package solution contains hardware, software and defined service packages. This extremely flexible data documentation solution from Fronius ensures your industrial series production operation is as future-proof as possible.
MAGNETIC CRASHBOX
The refined CrashBox dramatically reduces the load on the torch body in the event of a collision. This minimises the force impact of the load immediately following the collision, preventing damage to the torch body and drive unit. The extremely high reset accuracy (+/- 0.05 mm) allows production to be quickly resumed.
Base material | Chromium |
Material thickness | 10 mm (flange) / 1 mm (pipe) |
Filler metal | CrNi 19 12 3: 1 mm |
Gas | Ar+2.5% CO2 |
Vs | 150 cm/min |
Vd | 12.7 m/min |
Amperage | 208 A |
Voltage | 18.4 V |